Mold Testing and Inspection Services in Clifton, NJ

<< Back To Locations

From its location in the middle of Clifton, NJ, O2 Mold Testing has become a leader in finding and stopping mold. Since almost 20 years ago, our goal has always been the same: to make sure that homes and companies are safe, healthy, and free of the dangers that mold can cause. We use the most up-to-date technologies that are designed to work with Clifton's temperature and a wide range of methods to provide services that not only find mold infestations but also help stop them before they happen.

The Dangers of Mold and How to Avoid It

Mold is more than just an unsightly stain on walls or ceilings; it's also a major health risk that can have big effects on the health of people who are exposed to it. Learning about the risks of mold and taking steps to stop it from growing are important parts of keeping a home or workplace healthy. This piece talks about the risks of being around mold and gives you useful tips on how to keep mold out of your home or place of work.

Mold and Its Effects on Health

Mold can make allergens, irritants, and sometimes poisonous chemicals called mycotoxins. Mold exposure can cause many health problems, such as, but not limited to:

  • Effects on the body: these can be mild, like sneezing, runny nose, red eyes, and a rash on the skin (dermatitis), or more serious, like asthma attacks in people who are asthmatic and sensitive to mold.
  • Trouble Breathing: mold pollution can make long-term breathing problems worse and cause infections in people whose immune systems aren't strong enough.
  • Toxic Effects: some germs make mycotoxins, which can damage nerves and, in the worst cases, kill you. Long-term exposure to high amounts of mycotoxins can be especially bad.
Call us: 862-429-2249
| O2 Mold Testing of Newark
| Mold Testing/Inspection/Detection
| Hours: Mon-Sun 8:00am - 8:00pm
| Phone: 862-429-2249
| Dispatch address:
Main Ave, Clifton, NJ 07011

Nearby Locations:

Edison, Jersey City.

Schedule an appointment

Mold Testing Services in Clifton, NJ

O2 Mold Testing provides a wide range of all-around services that are meant to get rid of mold at its source.

  1. Air sampling is necessary to find mold spores in the air that could be moving through your HVAC system and putting people's health at risk. Air sampling pumps: collect mold spores in the air, giving you a clear picture of how clean the air is in your home or business.
  2. Surface Testing: looks for mold growth that can be seen on surfaces so that mold can be removed from its source.
  3. Bulk Material Testing: this involves looking at materials to see if they are contaminated with mold. This shows how bad the problem is and what needs to be done to fix it.
  4. Moisture Detection: this process involves identifying areas of excess moisture within a building, as moisture is a key factor in mold growth. With hygrometers, we can find places on a property where mold might be able to grow by checking the humidity levels in different areas. Infrared Thermography: this technology lets us find secret moisture in walls, floors, and ceilings, which helps us find places where mold could grow.
  5. Mold Inspection: this is a thorough examination of a property for signs of mold growth. It goes beyond merely looking for visible mold on surfaces. During a mold inspection, experts assess the entire building, including hard-to-reach areas, using specialized equipment to detect hidden mold.

These services are the foundation of our method; they give us a complete picture of the mold problem in a building and help us come up with effective ways to get rid of and prevent mold.


Full Process for Mold Checking

Our thorough mold inspection process is carefully designed to find both mold growth that is already there and possible risks for mold growth to happen in your home in the future. The whole process we use to look for mold is spelled out below:

First Communication with the Client

First, we talk about your worries, any known problems, and your goals for the mold inspection. This helps us make sure that our inspection fits your needs.

Visual Assessment

Our team does a full visual evaluation of your property to find places that are likely to grow mold and visible signs of mold growth. We focus on areas that have a lot of problems, like basements, bathrooms, kitchens, attics, and the space around windows and pipes.

Historical Analysis

We look at the house's past to see if there was any water damage, leaks, or known mold problems. This helps us check the places that are most likely to be damaged.

Infrared Cameras

We use infrared cameras to find differences in temperature in walls, ceilings, and floors. This lets us find secret moisture spots without having to do any harm. The moisture content in different objects and the humidity level in the air can be measured with moisture meters and hygrometers. When there is a lot of wetness and humidity, mold can grow quickly.

Air Sampling

To find out how many mold spores are in the air inside your home, we take air samples from different parts of your home and maybe even from the outside air to compare.

Surface Testing

We test the surface of places where we can see mold growth or think mold might be present. This could mean swabbing or pulling tape to get samples for more testing.

Post-Inspection Sample Analysis

Samples are sent to a specialized lab to find out what kinds of mold are present and how many spores there are. This information is very important for figuring out how bad the mold problem is and what health risks might be involved.

Moisture Source Identification

Using moisture monitoring tools, we figure out where the water that could cause mold to grow is coming from, like leaks, condensation, or not enough airflow.

Reports and Suggestions

We give you a full report of what we found, including where the mold grew, what kinds of mold we found, how much moisture we found, and where the humidity might have come from.

Mold Remediation Plan

Based on the results of the inspection, we suggest a custom plan for cleanup to get rid of the mold and stop it from growing again. This could mean fixing problems with wetness, making the airflow better, and hiring professionals to get rid of mold.

Follow-Up Check After Remediation

Once the remediation work is done, we offer a follow-up check to make sure that all the mold has been removed and that the moisture problems have been fixed.

Our orderly approach makes sure that we not only find mold and its sources but also put in place plans to stop mold from growing in the future. This protects your home's health and the health of the people who live there.


Mold Testing Prices and Packages

We offer different mold testing packages because we know that our clients have different needs. These packages are made to meet a range of needs, from basic checks for homeowners who want peace of mind to full evaluations for businesses or real estate deals that are more complicated. Our prices are clear and competitive, which shows that we care about giving our customers value and quality.

Basic package
Including a visual inspection by our mold inspector.
Standard package
Includes testing samples (2), results, and a full remediation protocol (each additional sample - $95)
Advanced package
This package includes a thorough visual assessment, precise moisture readings, a thermal imaging inspection, five indoor testing samples, a detailed written report of laboratory results, and a comprehensive mold remediation protocol.


It is important to take responsibility for the health and safety of your home. We encourage people and companies in Clifton to be proactive by setting up a full mold testing with O2 Mold Testing. The confidence and peace of mind that comes from knowing your home is mold-free is what our team is ready to give you.


What If You Choose O2 Mold Testing of Clifton?

If you choose O2 Mold Testing, you'll be working with a leader in finding and stopping mold. Our knowledge, gained from twenty years of hard work, along with our dedication to using the newest tools and methods, guarantees that our clients receive the best service possible. We are the best choice for mold testing services in Clifton because we care about our customers, give thorough reports, and find solutions that work.

Our Mold Experts who work for O2 Mold Testing are the most important part. The people who work for us are all qualified and bring a lot of experience and knowledge to the table. This makes sure that not only do we give our clients in Clifton accurate reports, but we also give them useful, effective solutions that are tailored to their needs and problems.

Get in Touch

Please don't hesitate to get in touch with us if you need more information or to set up your mold check - 862-429-2249. If you have any questions, our team is here to help you and make sure that your home or business in Clifton, NJ, stays healthy, safe, and mold-free.


Suspect mold is lurking, but you are not just sure? Don't wait. Call us now at 862-429-2249 to get started!

<< Back To Locations